Industrial Grade Superglue 20g
Industrial Grade Superglue GP
Medium viscosity formula fills gaps to 0.1mm. For use on perfect fit surfaces where fast set is required. Bonds non porous surfaces eg most plastics, metals, glass, PVCu, rubber and EPDM.
Viscosity at 25°c - 100cps.
Set time 5 to 15 seconds.
GP Important Product Information:
- Ensure surfaces are degreased prior to bonding.
- Ensure surfaces are close fitting. This adhesive will not bridge gaps.
- Do not use on glass.
- Do not use in applications involving constant water immersion.
- The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants.
- Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which can lead to extended setting times.
- Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds, cure speed is rapid so exercise care when aligning.