Corona SB-6033 S.Bus Digital Micro Servo 0.95kg/ 0.10sec / 6.2g

Features:
• S.Bus compatible
• High resolution
• The tightest deadband
• Accurate positioning and centering
• Faster control response
• Quicker acceleration
• Constant torque throughout the servos travel
• Increased holding power when stationary
• High precision potentiometer

Specs:
Model: SB-6033
Voltage: 4.8/6v
Speed: 0.12/0.10sec 60°
Torque: 0.82/0.95kg.cm
Current Draw: 200/220mA
Dead Band Width: iÜ3usec
Travel: 40°/one side pulse traveling
Bearing: MR74
Gears: Plastic
Gear Type: Digital
Motor: Coreless
Servo Wire length: 130mm
Operating Temp: -20/+60°C
Weight: 6.2g
Dimensions: 23.5 x 10 x 19.5mm
Spline count: 19

Different from conventional radio control systems the S.BUS system uses data communication to transmit control signals from a receiver to a servo, gyro, or other S.BUS compatible device. This data includes commands such as “move the channel 3 servo to 15 degrees, move the channel 5 servo to 30 degrees” to multiple devices. The S.BUS devices execute only those commands for their own set channel. For this reason, it can be used by connecting multiple servos to the same signal line.

[Operation by conventional radio control]
An S.BUS servo connected to a conventional receiver operates as a conventional servo.