DYS XM10A Multirotor 1-3S Ultra Light E.S.C. for High KV motors
DYS XM10A Multirotor 1-3S Ultra Light E.S.C. Speed Controller for High KV motors
Item No: XM0A
Model: mini 10A ESC for high KV Power
Specification:
- Signal frequency:20-500Hz/ Oneshot125 Ultra high speed
- Firmware:BLHeli
- Continuous current: 10A
- Instant Current: 13A
- BEC: No
- Weight 7.2g
- Dimmensions 23x12x4.5mm
Features:
XM series esc is the improved version from SN series, the basic frequency up to 50MHz and processing capacity is faster to support high KV motor properly by using the advanced processor.
Specially for Multi-copter for quicker throttle response times.
Throttle signal is a twisted pair cable, which reduces the crosstalk and interference.
Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current.
Miniaturization design, SN16/20A with high performance capacitor filter on the board, weight reduce to 2g, also already thicken the PCB copper to help with heat dissipation..
Support high frequency maximum up to 500Hz throttle signal, compatible with all flight controlers; Support ultra-high frequency Oneshot125 and high PWM frequency up to 3000Hz,
flight response will be more sensitive and rapid, throttle liner will be better and shooting will be more smooth. making this unit first choice for multicopters and racing.
Throttle lever travel and other settings are available to be set by USB linker; Support two-way mode and 3D mode for racing frame.