Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use. To find out more, including how to control cookies, see our Cookie Policy

Frsky D8R-II Plus

Frsky D8R-II Plus

Frsky D8R-II Plus

The D8R-II Plus is a slight change from the older D8R-II. It allows the user to select an internal or external voltage sensor. The D8R-II did not have an internal voltage sensor. The internal voltage sensor is a nice feature for our glider and gas pilots, and the external sensor is great for our electric pilots.

Compatible with FrSky Taranis and the telemetry modules: DFT, DJT, DHT, DHT-U


Dimension: 55*25*14mm

Weight: 12.4g

Operating Voltage Range: 3.5V-10.0V

Operating Current: 100mA

Operating Range: 1.5km

Resolution: 3072 (>11bit)

Servo Frame Rate: 18ms (FS – Normal Speed Mode)

                                9ms (HS – High Speed Mode)


Two external analog telemetry ports (A1&A2) and one digital data-stream port (Rx);

When side port pins of A1 and X are connected by the jumper, A1 will change from external analog telemetry port to internal built-in battery voltage sensor;

Convenient to upgrade – no need to open the receiver’s case when upgrading;

Two switchable PPM modes - FS mode and HS mode;

Alarm warning on low voltage, poor reception, etc.

Warning: Battery or servos are NOT to be plugged into side ports (A1/A2/Rx), otherwise damage may occur.

Warning: HS mode is only applied for high-speed digital servos. Other servos should select FS mode, otherwise servos will get hot and may burn out.

Write a review

Please login or register to review
  • Views: 8256
  • Brand: FRSKY
  • Product Code: Frsky D8R-II Plus
  • Availability: In Stock
  • £25.80
  • Ex Tax: £21.50

Tags: Frsky D8R-II Plus