Frsky DFT Plug in Module (Futaba-Hitec)
Frsky DFT Plug in Module (Futaba)
The DFT Plug in module is a great and inexpensive way of converting a 35mhz transmitter to a 2.4ghz or to change an existing 2.4ghz transmitter onto frskys ACCST band allowing you to take advantage of Frskys receivers and accessories.
The latest 'D' series (Two-Way - send and receive) modules have full telemetry capability. They have been designed and engineered specifically to allow simple conversion of virtually all makes and models of non-2.4GHz transmitters. External modules are available for transmitters that have a removable RF module; internal modules are available for installation inside the transmitter case for those that don't. All conversion modules provide full failsafe setting. They are supplied complete with the signature 2.4GHz short antenna.
Although the 'D' series modules are intended for use with FrSKY 'D' (Two-Way) series telemetry capable receivers, they are fully compatible with FrSKY non-telemetry receivers in the even more affordable, smaller and lighter V8 range.
This ACCST Telemetry DFT external module is designed for simple replacement of the external module fitted to several Futaba, HiTec and WFLY transmitters (see below for model compatibility).
- FrSKY’s Advanced Continuous Channel Shifting Technology (ACCST) system giving a highly reliable link, especially in high interference environments.
- Easy to bind and has instant link-up between transmitter and receiver.
- Excellent reboot times.
- All channels offer failsafe.
- Quick response.
- Very smooth servo movement.
- Alarms on monitored conditions in the receiver (e.g. low battery voltage, poor reception, etc.)
- Error-free link, through the use of a 48-bit CRC algorithm (Data contains error detection bits)
- Low power consumption.
- True two-antenna diversity.
- Firmware upgradable
- Model: DFT
- Modulation: ACCST (Advanced Continuous Channel Shifting Technology)
- Band: 2.4GHz
- Resolution: 11bit (3072)
- Operating Voltage Range: 6.0V-13.0V
- Operating Current: 50mA
- Output Power: 60mW
This DFT transmitter module is compatible with the following transmitters:
- Futaba: 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28
- HiTec: Optic 6, Eclipse 7, Prism 7.
- WFLY: WFT09, WFT08